Owner's Manual

SUV:
1.
Feed
the
antenna cable underneath the rubber weather
stripping
of the rear
tailgate
window/door and route
the
cable
along the rear hatch.
Lift
the
weather stripping from the
opening and tuck the cable inside it, then replace
the
weather
stripping. Pull the cable
out
from weather stripping and route
it
into
the
cabin under
the
interior
trim.
Avoid hinges
or
gears
that
could crimp
or
cut
the
cable.
2. Route the cable through
the
SUV's main cabin area under
the
interior
trim,
towards the
front
of
the vehicle. Use a blunt
plastic
putty
knife
or
similar blunt tool
to
lift
the plastic
trim
just
enough
to
tuck
the
cable under underneath. Avoid side
airbag locations
on
back pillars and above the doors. Airbag
locations are marked
with
IISRS" logos.
Be
careful not to crimp
or
cut
the
cable.
3. Bring the cable out
from
the
trim
near
the
front
of
the cabin
and route
it
under
the
carpet toward
the
dashboard
or
console. Coil any
excess cable
in
a
hidden location, such
as
under
the
carpet,
keepi
ng
it
away from
any vehicle pedals