Owner's Manual

Sedan/Coupe
With
Antenna Placed
at
the
Front
of
the
Roof:
1.
Feed
the antenna cable from the antenna underneath the rubber
molding around the windshield. Use a
blunt
plastic
putty
knife
or
similar blunt tool to
lift
the
rubber molding around the windshield
and tuck the antenna cable underneath
the
molding. Route the
antenna cable around and down the windshield
to
the lowest point.
2.
At
the
lowest corner of the windshield, route
the
cable out of
the
windshield molding and into the rubber weather stripping around
the door opening.
Lift
the weather
stripping
from the opening and
tuck
the
cable inside it, then replace
the
weather stripping.
Run
the cable inside of the weather stripping
to
the
bottom
of
the
door
opening.
3. Pull the cable out
of
the weather
stripping
at
the
bottom
of the
door opening and route
it
under the
carpet
toward the dashboard.
Coil any excess cable in a hidden location, such
as
under the carpet,
keeping
it
away from any vehicle pedals
or
controls. Secure the
excess cable
with
wire ties.
4. Bring the end of
the
cable
out
at
the PowerConnect
Vehicle Dock location.
Leave yourself enough
cable
so
you can easily
connect
it
to the antenna
connector of
the
dock.
5.
Continue
with
"Step 5:
Connect
the
Magnetic
Mount Antenna and PowerConnect Power
Adapter"
on
page 39.