Owner's Manual

area under the interior trim, towards the front of the vehicle.
Use a blunt plastic putty knife or similar blunt tool to lift the
plastic
trim just enough to tuck the cable under underneath.
Avoid side airbag locations
on back pillars and above the doors.
Airbag locations are marked with "SRS" logos.
Be careful not
to crimp or cut the cable.
5. Bring the cable out from the trim near the front of the cabin
and route
it under the carpet toward the dashboard or console.
Coil any excess cable
in a hidden location, such as under the
carpet, keeping
it away from any vehicle pedals or controls.
Secure the excess cable with wire ties (purchased separately).
6. Bring the end of the cable out at the PowerConnect Vehicle
Dock location. Leave yourself enough cable
so you can easily
connect
it to the antenna connector of the dock.
7. Continue with "Step 5: Connect the Magnetic Mount Antenna
and PowerConnect Power Adapter"
on page 39.