Owner's Manual

Vent
TILT
ADJUSTMENT
HOLES
~_
Vent
~_
HOOKED
~~iI)/
____
Vent
....--..-
'"
FOOT./'
Louver
3 Attach
the
Vent Mount
to
the
PowerConnect Vehicle Dock using
the provided screws.
4
Push
the
Vent Mount onto the
vehicle vent
as
shown (1) until
it
hooks
on
the rear of the vent
louver (2).
5
Rest
the foot against the
bottom
of
the vent (2),
and
adjust the
tilt
of the Vent Mount by
repositioning the foot to a different adjustment hole (3).
To
remove the Vent Mount, push the mount into the vent. Then
lift
up
until
disengaged from
the
rear of the vent louver, and remove the Vent Mount.