Owner's Manual
Table Of Contents
Adhesive Foot
/
IMPORTANTI Allow the
Dash
Mount adhesive
to cure (dry) for a minimum of
2-4
hours before using the mount.
The
best
adhesion occurs
after
24 hours.
Clean
the
surface with the alcohol preparation
pad
and let
it
dry
thoroughly.
Peel
off
the
adhesive liner. Position,
press, and hold the
Dash
Mount and
PowerConnect Vehicle Dock in place for
30
seconds.
The
dock mounting plate can
be
tilted
in
different directions.
Adjust
as
necessary
for
your particular vehicle.
When
the
orientation is correct, tighten the knob.
TIPI
To
remove, carefully
lift
the adhesive
pad
with your fingers
or
a spoon.
Warming
the
pad
with a hair dryer
for
several minutes will help soften the
adhesive.
5
4
6
•
•
Knob
\