Owner's Manual
Table Of Contents
Alternate Mounting
Methods
The mounting plate can be removed allowing the
SCC1
to be mounted
directly
to
a surface using
either double-sided
stick
tape,
hook
and loop,
or
other
adhesive material. Simply remove the 2
screws
on the
bottom
of
the
SCC1
tuner to remove
the bracket, as shown
in
Figure 3 (right). If using
adhesive material, avoid covering the SID label.
Figure 3
Combining with a SiriusConnect Interface Device
Some third-party interfaces are
designed
with the same asymmetrical chassis as the
SCC1.
To
connect
the units together, simply remove the mounting brackets from each
unit, rotate them
90°
and
connect
as shown
in
Figures 4 and 5 below.
[
Installation]
11