Owner's Manual

Installation
Installing the SCC1 Vehicle Tuner
It is recommended that prior to starting the installation, you thoroughly read this
manual and follow the guidelines listed below.
Consider the mounting location carefully. You should make sure that you avoid the
following:
• Any location where the tuner is exposed to moisture.
• Any location where the unit is exposed to extreme heat.
• Any location where the tuner cannot get adequate ventilation.
• Any location that would interfere with moving parts on the vehicle or hamper driving.
Mounting the SCC1 Tuner
Be sure that you find a location that is flat and has
clearance above the unit to prevent any damage as
well as allowing for ventilation.
Caution: If you are attaching the unit directly to the
vehicle's chassis, be sure that you check to make
sure the area behind the unit is free from moving
parts, fuel or brake lines, wire harnesses, or any
other items which may get damaged by drilling a
mounting hole or using the supplied screws.
10 [Installation]
i
I