Congratulations on the Purchase of your new SIRIUS SCC1 SiriusConnect Vehicle Tuner. The SCC1 SiriusConnect Vehicle Tuner is designed to work with any Sirius-Ready or SAT Radio Ready headunit. Some headunits will require the use of a SiriusConnect Interface Translator. Please consult your headunit manufacturer for more details concerning compatibility and interface availability. The SCC1 can also be integrated in select factory audio systems. Please consult your retailer for interface compatibility options.
Table of Contents TABLE OF CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WARNING AND SAFETY INFORMATION. . . . . . . . . . . . . . . . . . .4 Safety Precautions. . 4 FCC Warning. . . . 5 FCC Compliance. . 5 Canadian Compliance 5 COPYRIGHTS & TRADEMARKS . . .. .6 PACKAGE CONTENTS. . .7 CONNECTIONS. . . . . . . . . . .. . . . .\ ......8 Connector Information . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Basic system wiring options. . . . . . . . . . . . . . . . . . . . . . . .
Warning and Safety Information Safety Precautions Be sure to observe the following warnings. Failure to follow these safety instructions and warnings may result in a serious accident and/or personal injury. • Install the cables and wiring so that it is not crimped or pinched by screws or sharp metal edges. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring.
• Do not install the unit to high levels of humidity, moisture or dust. Doing so can result in electric shock or product failure. FCC Warning This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
Copyrights & Trademarks © 2007 Sirius Satellite Radio Inc. All Rights Reserved. ® "SIRIUS", the SIRIUS dog logo, "SiriusConnect", channel names and logos are trademarks of Sirius Satellite Radio Inc. All Rights Reserved. Hardware, subscription, and activation fee required. For full Terms & Conditions, visit http://www.sirius.com.Prices and programming are subject to change. Not available in HI and AK. Equipment and subscription sold separately. Installation required with some equipment.
Package Contents The following items are included with your purchase of the SIRIUS SCC1 SiriusConnect Vehicle Tuner. Unpack the kit carefully and make sure that everything shown is present. If anything is missing or damaged, or if the unit fails to operate properly, notify your dealer immediately. It is recommended that you retain the original carton and packing materials in case you need to ship your kit in the future.
Connections Connector Information Figure 1 identifies and describes the connectors on the SCC1 Vehicle Tuner. Figure 2 identifies the a-pin pin-out configuration. • SC OUTPUT: Connection for the SC Interface Cable. • ANTENNA: Connection for the satellite antenna. Bl~1 ~-...t~~~~§~======:~-=-=-="""'l"J+-----e:~::::O! I, Connect to Sirius-Ready Headunit or Sirius Connect Interface Translator Gm~o ~ """ _ ~ \. 1 A@\ ~ ANTENNA 5COUTPUT Figure 1 1 7 6 3----rn'-' '-'T1"T---- 1 8 4 2 3 5 4 2
Basic system wiring options The SCC1 SiriusConnect Vehicle Tuner is designed to work with any Sirius-Ready or SAT Radio Ready headunit. Some headunits will require the use of a SiriusConnect Interface Translator. Please consult your headunit manufacturer for more details concerning compatibility and interface availability. The SCC1 can also be integrated in select factory audio systems. Please consult your retailer for interface compatibility options.
Installation Installing the SCC1 Vehicle Tuner It is recommended that prior to starting the installation, you thoroughly read this manual and follow the guidelines listed below. Consider the mounting location carefully. You should make sure that you avoid the following: • • • • Any Any Any Any location where the location where the location where the location that would tuner is exposed to moisture. unit is exposed to extreme heat. tuner cannot get adequate ventilation.
Alternate Mounting Methods The mounting plate can be removed allowing the SCC1 to be mounted directly to a surface using either double-sided stick tape, hook and loop, or other adhesive material. Simply remove the 2 screws on the bottom of the SCC1 tuner to remove the bracket, as shown in Figure 3 (right). If using adhesive material, avoid covering the SID label.
Mounting the Magnetic Antenna The installation of the magnetic antenna consists of two installation steps: • Mounting the magnetic antenna and cover/tail on the vehicle • Routing the antenna cable through the vehicle to the tuner The magnetic mount antenna has a strong magnetic mount designed to hold the antenna in place during normal driving conditions (highway/city). This also allows for easy removal for transferring the antenna to other vehicles.
Sedan/Coupe Pickup Truck SUV/Mini·Van Convertible Figure 6 Mounting the Antenna on the Vehicle Follow this procedure to mount the antenna: 1. Select an appropriate mounting position for your type of vehicle that has an unobstructed area of 3 inches by 3 inches around the antenna. 2. Attach the rubber cover/tail to the antenna, as shown in Figure 7. and press the antenna cable into the rubber cover/tail.
Protective Material Adhesive Strips Rubber CoverlTail ~~-- Antenna Cable Figure 7 5. Double check that the location of the antenna and rubber cover/tail are correct, and continue to press firmly down on rubber cover/tail for another 30 seconds. At room temperature (68 degrees), maximum adhesion usually occurs within 72 hours. During this period, avoid car washes and other contact with the antenna and rubber antenna cable cover/tail.
Antenna Cable Routing When you have successfully mounted the antenna on the vehicle, you can begin the cable routing portion of the installation. Separate antenna cable routing procedures are provided for each type of vehicle: • • • • Sedan/Coupe on page 15 Pickup Truck on page 16 SUV/Mini-Van on page 17 Convertible on page 18 Sedan/Coupe Antenna Cable Routing Procedure Figure 9 shows how the antenna cable can be routed from the antenna to the tuner in a sedan/coupe.
Pickup Truck Antenna Cable Routing Procedure Figure 10 shows how the antenna cable should be routed from the antenna to the tuner in a pickup truck. The exact routing of the antenna cable may vary depending upon where you have installed the dock in your vehicle. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with "SRS" logos.) "-.~I===== I - ..........--........-.... - - - -. - '\ ,i, , i ~ . . \l.r.};~ 2.
SUVIMini-Van Antenna Cable Routing Procedure Figure 11 shows how the antenna cable should be routed from the antenna to the tuner in an SUV or a Mini-Van. The exact routing of the antenna cable may vary depending upon where you have installed the dock in your vehicle. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with IlSRS" logos.) 1. Feed Cable Under Rubber Seal Around Hatch Opening ~~~§ 3.
Convertible Antenna Cable Routing Procedure Figure 12 shows how the antenna cable should be routed from the antenna to the tuner in a convertible. The exact routing of the antenna cable may vary depending upon where you have installed the dock in your vehicle. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with "SRS" logos.) 6. 1. Bring Cable from of Trunk Lid 3. Tie Cable to Hinge Strut, Allowing Slack for Lid to Open and Close.
Operation Activating Your SCC1 Tuner You must activate the SCC1 tuner before you can begin to receive the SIRIUS Satellite Radio Service. In order to activate your radio subscription, you will need the SIRIUS 10 (SID) which uniquely identifies your tuner. The SID can be found on a sticker located on the SCC1 packaging, or on the bottom of the SCC1 itself. When you have located the SID, write it down in the space provided near the end of this manual and store it for future reference.
Specifications Operation Frequencies . 2322.293/2330.207 MHz Satellite Terrestrial 2326.250MHz Power Requirements 12 Volts DC (1 Amp MAX), 0 -20 to +85 0 C (-4 0 to 185 0 F) Operation Temperature Audio Output 1V (RMS) Signal-to-noise (SIN) Greater than 75dB Receiver Dimensions (SCC1 only) 86.7mm x 88.7mm x 33.
SIRIUS ID Write down the SIRIUS 10 (SID) of your SCC1 Tuner in the space provided below.
SIRIUSiJ SATELLITE RADIO sirius.com SIRIUS Satellite Radio Inc. 1221 Avenue of the Americas New York, NY 10020 800.869.5590 SCCl (SCC1092407b) OO.A BC D1.
If you experience problems with the operation or performance of your SIRIUS radio, If you experience problems with the operation or performance of your SIRIUS radio, DO NOT RETURN THIS RADIO TO YOUR RETAILER. DO NOT RETURN THIS RADIO TO YOUR RETAILER. Call SIRIUS Customer Care at 1-800-869-5364 and speak to one of our service representatives. Call SIRIUS Customer Care at 1-800-869-5364 and speak to one of our service representatives. See inside for warranty details. See inside for warranty details.
SIRIUS Limited Warranty What this Warranty Covers LIMITATIONS OF LIABILITY This warranty covers defects in material and workmanship for 1 Year from the date of purchase by the original retail purchaser only. SIRIUS Satellite Radio Inc. ("SIRIUS"), at its sole option, will repair or replace the product with a new or reconditioned product without charge for parts and labor. Products replaced under this warranty become the property of SIRIUS.
