Owner's Manual
Table Of Contents
Vehicle Installation
of
the
windshield molding and
into
the
rubber weather stripping
around
the
door opening.
Lift
the weather stripping from
the
opening and
tuck
the
cable inside it, then replace
the
weather
stripping.
Run
the
cable inside of
the
weather stripping
to
the
bottom
of
the
door opening.
4. Pull the cable out of
the
weather stripping
at
the
bottom
of
the
door opening and route
it
under
the
carpet toward
the
dashboard.
Coil any excess cable in a hidden location, such as under
the
carpet,
keeping
it
away from any vehicle pedals or controls. Secure
the
excess cable
with
wire ties.
5.
Bring
the
end of
the
cable out at
the
PowerConnect Vehicle Dock
location. Leave yourself enough cable
so
you can easily connect
it
to
the
antenna connector of
the
dock.
6. Continue with
HStep
5: Connect
the
Magnetic Mount Antenna and
PowerConnect Power Adapter"
on
page 39.