Owner's Manual
Table Of Contents
airbag locations
on
back pillars and above the doors. Airbag
locations are marked with "SRS" logos.
Be
careful not to crimp
or cut
the
cable.
4. Bring the cable out from the
trim
near the front of the cabin
and route
it
under the carpet toward the dashboard or console.
Coil any excess cable in a hidden location, such
as
under the
carpet, keeping
it
away from any vehicle pedals or controls.
Secure the excess cable with wire ties (purchased separately).
5.
Bring the end of the cable out at the PowerConnect Vehicle
Dock location. Leave yourself enough cable
so
you can easily
connect
it
to
the antenna connector of the dock.
6.
Continue with "Step 5: Connect the Magnetic Mount Antenna
and PowerConnect Power Adapter"
on
page 39.
• Pickup Truck:
1.
Use
a blunt plastic
putty
knife
or
similar blunt tool
to
lift
the rubber moldina around
,
the windshield
and
tuck the
antenna cable underneath it.
2. Continue tucking the cable
underneath the windshield
molding around the windshield
to
the lowest corner.
3.
At the lowest corner of the
windshield, route the cable out
------rl~cr
I
'-
~~---~,-
,
I
•
,
..
'
------