Owner's Manual

the front of the vehicle. Use a blunt plastic putty knife or similar
blunt tool to
lift the plastic trim just enough to tuck the cable
under underneath. Avoid side airbag locations
on back pillars and
above the doors. Airbag locations are marked with "SRS" logos.
Be careful not to crimp or cut the cable.
5. Bring the cable out from the trim near the front of the cabin and
route
it under the carpet toward the dashboard or console. Coil
any excess cable in a hidden location, such
as under the carpet,
keeping
it away from any vehicle pedals or controls. Secure the
excess cable with wire ties (purchased separately).
6. Bring the end of the cable out at the
PowerConnect Vehicle Dock
location. Leave yourself enough cable
so you can easily connect
it to the antenna connector of the dock.
7. Continue with "Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 39.