Owner's Manual

TILT
ADJUSTMENT
HOLES
Dash
~.Vent
o
/HOOKED
~~
Dash
__ .Vent
.---- "
Louver
3 Push the Vent Mount onto the vehicle vent as shown (1) until it
hooks on the rear of the vent louver (2).
4 Rest the foot against the bottom of the vent (2), and adjust the
tilt of the Vent Mount by repositioning the foot to a different
adjustment hole (3).
PUSH ••••
To remove the Vent Mount, push the mount into the vent. Then lift up until
disengaged from the rear of the vent louver, and remove the Vent Mount.