Owner's Manual
Table Of Contents
Roof
Mount
When
mounting the antenna on the roof
of
a home or building, mount the antenna as close
to
the peak
of
the roof as possible. Remember
to
avoid blocking the antenna's view
of
the sky by
locating it where a chimney, dormer, gable, etc., may
obstruct
the
sky view. (Figure 9)
The antenna mounting bracket should be oriented in a vertical position as shown in Figure
5,
and mounted directly
to
the soffit
or
chimney
of
the building or home using the provided #
10
screws.
Figure
9
Once
you have determined a suitable mounting location, use the mounting bracket
as
a
template and mark the mounting area with the location
of
the four screw holes
in
the bracket.
Then, using a
3/32
in. drill bit, drill pilot holes for the screws. It may
be
necessary to fill the
holes with a small amount
of
caulk
to
insure a watertight installation.
Screw
the bracket
to
the
mounting location using the provided
#10
screws.
[ Installation]
17