Manual

47
Option 3: PowerConnect Installation Instructions
1 Insert the dock into the
mount.
2 Insert your Xpress
RCi
into the dock.
3 By default, your
Xpress
RCi
turns on
automatically when
it is plugged in and
receiving power. If it does not, power on your
Xpress
RCi
by pressing the Power button.
NOTE! You may experience a brief delay while your
Xpress
RCi
powers up. If you press the Power button
during this time, you will see a “Please Wait” message.
4 Be sure the vehicle is outside and the antenna
has a clear view of the sky. Verify that you are
receiving the XM signal.
There should at least be
one bar on the upper right
corner of the main display
screen that denotes antenna
signal strength. You can also
press menu and scroll down
to highlight Signal Indicator
and press the Select button.