Manual

of the windshield molding and into the rubber weather stripping

around the door opening. Lift the weather stripping from the

opening and tuck the cable inside it, then replace the weather

stripping. Run the cable inside of the weather stripping to the

bottom of the door opening.

4. Pull the cable out of the weather stripping at the bottom of the

door opening and route it under the carpet toward the dashboard.

Coil any excess cable in a hidden location, such as under the carpet,

keeping it away from any vehicle pedals or controls. Secure the

excess cable with wire ties.

5. Bring the end of the cable out at the PowerConnect Vehicle Dock

location. Leave yourself enough cable so you can easily connect it

to the antenna connector of the dock.

6. Continue with “Step 5: Connect the Magnetic Mount Antenna and

PowerConnect Power Adapter” on page 39.

Vehicle Installation