Manual

•SUV:

1. Feed the antenna cable underneath the rubber weather

stripping of the rear tailgate window/door and route the cable

along the rear hatch. Lift the weather stripping from the

opening and tuck the cable inside it, then replace the weather

stripping. Pull the cable out from weather stripping and route

it into the cabin under the interior trim. Avoid hinges or gears

that could crimp or cut the cable.

2. Route the cable through the SUV’s main cabin area under the

interior trim, towards the front of the vehicle. Use a blunt

plastic putty knife or similar blunt tool to lift the plastic trim

just enough to tuck the cable under underneath. Avoid side

airbag locations on back pillars and above the doors. Airbag

locations are marked with “SRS” logos. Be careful not to crimp

or cut the cable.

3. Bring the cable out

from the trim near

the front of the cabin

and route it under

the carpet toward

the dashboard or

console. Coil any

excess cable in a

hidden location, such

as under the carpet,

keeping it away from

any vehicle pedals