Manual

3 The dock mounting plate can be tilted in different directions.

Adjust as necessary for your particular vehicle. When the

orientation is correct, tighten the knob.

4 Clean the surface with the

alcohol preparation pad and

let it dry thoroughly.

5 Peel off the adhesive liner.

Position, press, and hold the

Dash Mount in place for 30

seconds.

IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for a minimum of

2-4 hours before using the mount. The best adhesion occurs after 24 hours.

TIP! To remove, carefully lift the adhesive pad with your fingers or a spoon.

Warming the pad with a hair dryer for several minutes will help soften the

adhesive. Be careful not overheat the surface with the hair dryer or you may

damage the surface or Dash Mount.

Knob Adhesive Foot Dock Mounting Plate