Dimensions & Spec Sheet

Wall Stud
Wall Stud
Build blocking between wall studs
and behind drywall to receive screws
from bracket
73 1/4 ” to floor = hood 24” above cooktop
79 1/4 ” to floor = hood 30” above cooktop
Center Line
Min 31/2”
72 1/4 ” to floor = hood 24” above cooktop
78 1/4 ” to floor = hood 30” above cooktop
Preparation of wall structure to receive mounting bracket
Minimum 15”
120 V 60HZ grounded electrical supply -
either direct hot wire or wall outlet - refer
local building codes. Offset from center
line of ductwork and stay within flue
cover extremities.
6” round duct
outlet point
Flue cover extremities
10 3/8”
Preparation of Wiring location
Ductwork Positioning:
Exhaust ductwork to be available
either via the ceiling or through
the rear wall and exactly on the
Center Line - rear wall exit must
be a minimum of 84” above the
floor.
Sirius Range Hoods Ltd accepts no liability for any errors or omissions in this document and it is provided for
guidance only - we reserve the right to change any information presented here in from time to time.
Sirius Range Hoods - USA and Canada
Tel: [phone] Fax: [phone] email: [e-mail]
Specification Sheet
Model SU7
Canopy wall mount range hood