Owner's Manual

Choose and Setup Your Audio Connection Option
Connect your radio to play the aUdio through your
vehicle's stereo system or
rM radio using one of the
following options:
• Best:
Use the included AuJ. In Cable il your
vehicle's stereo system has
an auxiliary input
connection. Plug one end of the cable Into the
green AUDIO connector
on the right side 01
the PowerConnect Vehicle Dock and the other
end into the vehicle stereo system's auxiliary
input
Jack. Set the stereo system to play from the auxiliary input source.
•
Better: Use a Cassette Adapter il your vehicle
has a built-in cassette player. Cassette Adapters
are sold separately. Plug the Cassette Adapter
into the qreen AUDIO conneclor
on right side
of the
PowerConned Vehicle Dock. Insert the
Cassette Adapter into the vehicle's cassette deck.
Set the stereo system
to play from the cassette
source.
• Good:
Use the PowetConnect feature in your radio. PowerConnect plays Ihe audio through
your vehicle's
rM radio. When you have finished step 4, you'll first need to find an available FM
channel, and then you'll need to ensure that the Satellite Radio and your vehicle's rM radio are
tuned to the same available
FM channel. (Step 5)
• Best: Use an FM Direct Adapter. Use an FM Direct Adapter (rMDA) if none of the above
three audio connection options works
In your vehicle. The FMDA needs to be installed by a
professional installer and
directly connects the radio to your vehicle's rM radio.
.. TIP! Refer to your vehicle's owners manual to lind the location of the auxiliary input jack, or
eIIlI consult the vehicle dealer. To learn more abOut purchasl",~ a Cassette Adapter or FMOA, check
with the retailer where you bou9ht your radio or 90 to slrius.com/accessorles.
If you connected the audio using the AUX In Cable or a Cassette Adapter, the installation is
complete. Now
sit back and enjoy Satellite Radio.
If you are connecting the audio using PowerConnect, continue with step 5.