Owner's Manual

DASH MOUNT - Option 2
Option 1
DASH
MOUNT· Options 1 & 3
•
• E9.
o
DASH MOUNT - Option 3
should be oriented like
the image above,
.(j •
• E9.
DASH MOUNT - Option 1 &
DASH MOUNT - Option 2
should be
oriented like the
imaQe above.
Choose a Location for Your Radio and Mount It
3 Attach the Dash Mount to the
PowerConnect Vehicle Dock
using the provided screws,
4 Clean
the surface with the
alcohol preparation pad and let
it dry thoroughly,
Instlllllnq the DlISh Mount:
,. CAUTION: Ttle adhesive used on the Dash Mount may
.., IW dlllicult to remove. 00 not Install ttlls mount on
leattler surfaces (contact your automobile dealership If
you are unsure about your dash surface)" and make
sure the air temperature is at least60"F (1S"C) during
installation. If It's not
atleasl 60"F, turn on the heater
In your vehicle to bring the temperature up to 6O"F.
1 Locate a flat surface for the Dash Mount. Make
sure
there is ample room for the PowerConnect
Vehicle Dock and radIo when installed.
2 Set the orientation of the Dash Mount before
adherIng it. Loosen the knob and adjust the
adhesive foot for the location you selected:
Belore you beQin, you may wanl to have the User Guide lor your Satellite Radio handy, as
there are a couple 01 steps where we sUQQest you reference it. If you do not have the User
Guide, go to slrlus.com, click on INSTALL. & ACTIVATE, and then click DOCUMENTATION.
Click
on the User Guide link for your radio.
You can use either the Dash Mount or the Window Mount for your radio, depending upon your
vehIcle and the location where you want to place your radio.
,. CAUTION! Make sure your radio Isn't In a place where It could Interfere with driver visibility or
.., safe deployment of the alrbaqs. Airbaq locations are typically marked with "SRS" logos.