Owner's Manual

tool to lift the plastic trim Just enouQh to tuck the cable under
underneath. Avoid side alrbaQ locations
on back pillars and
above the doors. AlrbaQ locations are marked with "SRS"
10Qos. Be carelul not to crimp or cut the cable.
5. BrlnQ the cable out from the trim near the Iront 01 the cabin
and route It under the carpet toward the dashboard or console.
Coli any excess cable In a hidden location, such as under the
carpet.
keeplnQ It away from any vehicle pedals or controls.
Secure the excess cable with wire ties (purchased separately).
6. Brinq the
end 01 the cable out at the PowerConnect Vehicle
Dock location. Leave yourself
enouQh cable so you can easily
connect
it to the antenna connector of the dock.
7. Continue with "Step 5: Connect the MaQnetlc Mount Antenna
and PowerConnect Power Adapter"
on paQe 37.