Introduction •••••••••••••••••••••.•••••••••••••••••••••••••••••• S Features.•.•..•................••••••..•••..•..........•...........•••.••••• 6 safety and Care Informaflon •......••••..•••..••...••••..••...•••......•.••••• 7 What's In the Bo~1 ••••...•••.......•......•..•••..••••..••...•••....••....... 9 PowerConnect Vehicle Dock 10 Vehicle Installation •••••••••••••••.••••••••••.•••••••.••••••••••• 11 Step 1: Choose a Location for Your Radio .............••.•..••...•••....•••.••...
Features ConQratulatlons, on your purchase of the SIRIUS Dock & Play Pow~t{:onnect Second Vehicle Kit! Your new Second Vehicle Kit has everythinQ you need to use your radio In a second vehicle. , Add Satellite Radio to a second vehicle: No need for a second subscription; just install this Kit in another vehicle - your spouse's car, the family minivan, an RV, or even a boat· and then simply move your radio between the two.
Safety and Care Information IMPORTANTl Alw~ys rud ~nd undfrst~nd ~ll th' Instrucllons to ~vold Injury to yoursflf and/or damagf to your d,vlcf. SIRIUS Xt.4 Radio Inc. discillms III responsibility lor damag, Irom data lou dUf to Drukdown, r,palr, or other caus,s. o o 00 not ellpose to eKtreme temperatures (above 140°F or below -4°r, or above 60°C or below -20·C). 00 not ellpose to moisture. 00 not use device near or In water.
• for optimal audio performance, Insert the PowerConnect Power Adapter directly into your vehicle's cil;larette Ilqhter/power outlet. Don't use an Intermediary device, such as a dual vehicle power adapter for multiple devices. • When uslnQ this product, It Is always important to keep your eyes on the road and hands on the wheel. Not doinQ so could result In personal injury, death, and/or damaQe to your device, accessories, and/or to your vehicle or other property.
What's In the Box? 0 0 •• o n rlJL Dash Mount SrRIUSi; Window Mount PowerConn,cl Vehicle Oock Au~ PowtrConn.c! MaQn.tlc MOllnt Antenna Power Adapl.r Ind rail Screws In Cable Alcohol Preparation Pads TIPl For other acC!!SSOrlfS you can add to your Vehici. Kit -Irom a Remote Control lor fillS. 01 un, to a Cassftte Adapter lor vehlcln with a cassette play,r, 10 Pfof.ssionalillstillatlon If you'd rather leav, your In-vehicle selup to Itlt' experts - Just visit sirlus,com/accessorl.
PowerConnect Vehicle Dock Color-Coded Connections The color-coded PowerConnect Vehicle Dock makes It simple to connect. just match the colors on the cable ends to the colors on the dock to see what Qoes where. Front ..nd Side Views 0 0 ~ - . i@@ 'I=- SIRI usi< PWR (Red) FM (Blue) Connection Connecllon 'or Powerconnect 0~tlonal FM Power Adapter. 0 rect Adapter (, old np,rately). 'Of Oo~klnq A..III Fits Into Slots on tile rear of tile SIRIUS r.dlo to secure the radio.
Step 1: Choose a Location for Your Radio Before you beqln, you may want to have the User Guide for your Satellite Radio handy, as there are a couple of steps where we suqQest you reference it. II you do not have the User Guide, QO to slrlus.com, cUck on INSTALL & ACTIVATE. and then DASH MOUNT - Option 1 click DOCUMENTATION. Click on the Unr Manual link for your radio. When Installlnq the PowerConnect Vehicle Dock (included in this Kit) In your vehicle.
DASH MOUNT· OptlOfl 3 WINDOW MOUNT· OpllOl1 1 WINDOW MOUNT· OptlOl'l 2 \
Step 2: Install the Dash or Window Mount DependinlJ on your situation, you can either choose to use the Dash Mount or the Window Mounl. Installln9 the Dash Mount: Th~ OIdlll'slvl' used on the Dash Mount may bl' dlilicult to remove. 00 not Inslalllllis mount on leather surlilcl's (Contilct your automoblle dnll'rship II you are unsure about your dash surfact), aM make sure the /lir temperature Is lit Iusl 6O'f' (IS'C) during Inst.lI.tiQn.lf In nolal ~.
"Step I: Choose a location for Your Radio" on page 12. S Attach the Dash Mount to the PowerConnect Vehicle Dock using the provided screws. • • 4 Clean the surface with the alcohol preparatlon pad and let it dry thoroughly. 5 Peel oil the adhesive liner. Position, press, and hold the Dash Mount and PowerConnect Vehicle Dock in place for 30 seconds. .. IMPORTANTl Allow the Dash Mount adhesive 10 cure (dry) lor alleast 24 hours before using the mount. 6 '''''''\ The dock mounting plate can be titled
orientation Is correct, tlQhten the knob. til TIP' To femove, cillrefully 1111 the iIIdheslvf pad with your flngefs Of ill spoon. Warminq the pad with a hair dryer lor s~er.1 minutes will help solten the .dheslve. Be Cllrelul not to ov.rhul the surl.c. With Ihe h.lr dry'r or you mill.,. damage 1M surlace or Dastl Mount. Inst.lllnq the Window Mount: IMPORTANTI Stiltn Of locllitles may prohibit drlvlnq with ill suction mount on the windshield. (Sn California Vehkle Cooe 5«tlon 26708(.
3 Attach the Window Mount to the PowerConnect Vehicle Doell USimil the provided screws. , . IMPORTANT! for tlatlty, the " lIIustriltlons on thIs paQ! do not show Ihe dock attached to the mount. However, the dock should alrndy be attached as shown In step J. 4 Press and hold the mount i1c;lainst the windshield. Then press the lever all the way down to attach the Window Mount to the windshield. S loosen the knob on the Window Mount to adjust the heiqht of the Dodt Mounting Plate 10 <0 lOG., ...
Vehicle Installation radio lor the best view. Once the helQht 15 correct. tlqhten the knob. The dock mountinQ plate can be swiveled to the It'ft or riQht, and adjusted up or down, to optimize the driver's view of the radio. Step 3: Mount the Magnetic Mount Antenna The MaQnetic Mount Antenna contains a strom;! maqnel which will slick to any metal part of your vehicle, but will not damaQe the vehicle. 1 Choose the best location for your MaQnellc Mount Antenna considerinQ your vehicle type.
SUV: We recommend mountlnq the antenna at the rear of the roof as shown. Convertible: We recommend mountinq the antenna at the teadlnq edqe of the trunk as Shown. '.• --.•• ~ •• ·:, .-rI ""'.' • I ~~ .~~ {;,: I Pickup Truck: We recommend mountlnq the antenna Just above the front windshield as shown. .... _----~ , : • ' \ .• (; • · ~ ••• -._- I . •, \• ....
Vehicle Installation 2 3 Attach the Rubber Tall to the antenna and press the antenna cable Into the Rubber Tail. The Rubber Tall will help to position the antenna the correct distance from the edQe 01 the roof or trunk lid. MaQn~lle Mount Antenu -. (Upslft-Down) Clean the surface of the selected mountlnQ location uslnQ the alcohol preparation pad and let It dry thoroughly. • • Follow the Tips and Cautions shown on the nl!xt several pages, and place the antenna In the location you selected.
• ..•............... • ..... .... •• • '" ·. ...... ....•.. TIP! Mount the antenna 01'1 the rool Hor most vehicles) or trunk (lor convertibles) where It has a clur view of the sky in III dlr«tlons.
Vehicle Installation TIPl MouM th••nlenrl. on the rool wh.'rf It has at leoast 3inch.s of clur space around It. TIPI Us. the supplied Rubber T'il to cover ,nd protect th. ,nt,nll' Clbl... CAUTlONl Don't mount tht' anlt'nna clos,r tn.n 3ind'es from Ihe fllql! ollh. roof. Use the supplied RuDMr Tail as a quid. lor IUdQlnq pro~r length ,nd corr.cl posltlonlnq.
CAUTION I Don't mount the antenni Inside th' v,hlcle, for example, on the dashboard. CAUTIONt Don't mount the antenna on any of the vehicle's front, back Of side plllars. CAUTIONt Don't mount the antenna close to a roof rack. A.dJust the rack so It's further away from the antenna or move the antenna closer to the center of the rool.
CAUTIONl Don't mount the M.gnetlc Mount Antenn. close to OInother .nlenn•. Mounlll .t lust 31nchu .w.y. f--- TIPl Always be carefUl to Include enough slack In your cable to ilccommoo.te opell doors or trunk lids. Use things typicilily founo around the home, like electrical la~. to SKure cables In arns so that hingu do not pinch the cable with the door. Hidt' allY elCt'ss cablt' In Ihe trim.
Step 4: Route the Magnetic Mount Antenna Cable Belore you begin routing the antenna cable, read these Qenerallnstructions for how to route and hide the antenna cable. Then route your antenna cable according to the Instructions which follow for your specific type of vehicle.
Roule cable out from under rear windshield mouldlnQ and tuck Into weatherstrlpplnQ around trunk openinQ Ayoid sharp bends bV runnlnQ cable throuQh weatherslrlpplnQ for seyeralinches Pull weatherstrlpplnQ from trunk openlnQ Tuck cable into weatherstrlpplnQ.
Bring cable out of weatherstripping and into trunk ,, , , ,, , ,, Route cable along trunk wall and Into cabin through gap or conduit, alonQ existing wlrlnQ harness , , , , ,, , , , ,, » '"l_'" <---'( ~\"- - "" ~~, , ?", , ...... ...., f,, .
Use a blunt plastic putty knife or similar blunt tool trim and tuck cable under trim. Continue , Route cable under towards Iront of vehicle " trim or upholstery " . -1 , ,, , , , , , cable ".--~~;:::--"i""_,,,,"C~ntinue t·., ~ ~ under trimroutinq or carpet '...,-," .....'.. ,_ ,, ~ ' towards front 01 vehicle , ..
Continue routinQ uble under carpel or console to radio location Coli excess uble under carpet or mat • • <. • • ••• " l' • • ' ••.. •'. ~~ • \ -------- BrlnQ cable out from trim BrinQ cable out from trim and route under carpet to dashboard or console TIPl Always be careful to include enouQh slack in your cable to accommodate open doors or trunk lids. Use thlnQS typically found around the home, like electrical tape, to secure cables In areas so that hlnQes do 1'101 pinch Ihe cable wllh the door.
• Sedan/Coupe With Antenna Placed at the Rur of the Roof: 1. Feed the antenna cable from the antenna underneath the rubber molding around the rear window. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the rear window and tuck the anlenna cable underneath Ihe molding. Route the antenna cable around and down the window to the lowest point. If your rear window does not have rubber molding, we recommend consulUnq a professional Installer. 2.
tool to lift the plastic trim Just enouQh to tuck the cable under underneath. Avoid side alrbaQ locations on back pillars and above the doors. AlrbaQ locations are marked with "SRS" 10Qos. Be carelul not to crimp or cut the cable. 5. BrlnQ the cable out from the trim near the Iront 01 the cabin and route It under the carpet toward the dashboard or console. Coli any excess cable In a hidden location, such as under the carpet. keeplnQ It away from any vehicle pedals or controls.
• Sedan/Coupe With Antenna Plaud at the front of the Roof: 1. feed the antenna cable Irom the antenna underneath the rubber moldlnQ around the windshield. Use a blunt plastic putty knife or similar blunt tool to 11ft the rubber moldinQ around the windshield and tuck the antenna cable underneath the moldinQ. Route the antenna cable around and down the windshield to the lowest point. 2.
• SUY: 1. Feed the antenna cable underneath the rubber weather stripping of the rear tailgate window/door and route the cable along the rear hatch. Lift the weather stripping from the opening and tuck the cable Inside It. then replace the weather stripping. Pull the cable out from weather stripping and route it into the cabin under the Interior trim. Avoid hinges or gears that could crimp or cut the cable. 2.
cable with wire ties (purchased separately). 4. BrinQ the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enouQh cable so you can easily connect It 10 the antenna connector of the dock. 5. Continue with "Step 5: Connect Ihe MaQnetlc Mount Antenna and PowerConnect Power Adapter" on paQe 37. • Convertible: I. BrlnQ the antenna cable from the antenna Into the trunk at the tront edQe 01 the trunk lid. Keep any bends In the cable loose.
and above the doors. AlrbaQ locations are marked with "SRS" loqos. Be careful not to crImp or cut the cable. 4. BrlnQ the cable out from the trim near the front of the cabin and route It under the carpet toward the dashboard or console. Coli any eKcess cable In a hidden location, such as under the carpet, keeplnq It away from any vehIcle pedals or controls. Secure the eKcess cable with wire ties (purchased separately). 5. BrlnQ the end of the cable out at the PowerConnect Vehicle Dock location.
door openinq and route it under the carpet toward the dashboard. Coil any excess cable In a hidden location, such as under the carpet, keepinq it away from any vehicle pedals or controls. Secure the excess cable with wire lies. 5. Brinq the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enouqh cable so you can easily connect it to the antenna connector of the dock. 6. Continue with "Step 5: Connect the Maqnetic Mount Antenna and PowerConnect Power Adapter" on paqe 37.
Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter .' 1 Pluq the Maqnellc Mount Antenna inlo the sliver ANT connector on the rlqht side of the PowerConnect Vehicle Dock. 2 Insert the PowerConnecl Power Adapter Into your vehicle's cigarette liqhter or power adapter socket. 3 Pluq the PowerConnect Power Adapter Into the red PWR connector on the lett side of the dock.
Step 6: Connect the Audio To play audio through your vehicle's stereo or FM radio, decide on one of the followlnQ audio connection options: • Option 1: Best: Use lhe Included Aux In Cable If your vehicle's stereo system has an auxlUary Input connection. Refer to your vehicle's owners manual to find the location of the auxiliary input Jack, or consult the vehicle dealer. , .
OptIon 1: Aux In Cable Installation Instructions 1 PluQ one end of the Aux In Cable Into the qre.n AUDIO connector on the dock. " IlVXlfff'lOOE . . 2 PluQ the other end Into the auxillary Input jack connection of your vehicle's stereo system. 3 Insert your radio Into the dock, allQninQ the radio aQalnst the rear olthe dock so that the ralls on the dock lit Into the mountinq slots in the back of the radio. ~I[ i - SIRIUS" 0 ~ I): • \'1"0"1.11_111111111"11} SlltiUSi.
4 Pow~r S S~t your v~hlcle's ster~o syst~m to play Input Irom the auxiliary input source. 6 B~ sur~ th~ v~hlcl~ 7 on your radio by pr~ssinq th~ Power button. is outside and the antenna has a clear view 01 the sky. Verlly that you are receiving the SIRIUS signal. Refer to the User Guld~ whIch accompanied your radio, and display the Signal Indicator screen, If the signal Is good, and you are hearing the audio when tuned to channellB4, the installation Is Signal complete.
OptIon 2: Cassette Adapter InstallatIon InstructIons 1 PluQ the Cassette Adapter Into the Qreen AUDIO connector on the dock. 2 Insert the Cassette Adapter In the vehicle's cassette deck. 3 Place your radio Into the PowerConnect Vehicle Dock, aligning the radio aQalnst the rear of the dock so that the rails on the dock fit Into the mounting sloh in Ihe back 01 the radio. Slide the radio all the way down onto the dock so that It fils firmly.
4 Power on your radio by pressing the Power button. S Set the vehicle's stereo system to play from the cassette source. 6 Be sure the vehicle is outside and the antenna 1'9'T' has a clear view 01 the sky. Verify that you are receiving the SIRIUS signal. Refer to the User "Guide which accompanied your radio, and display the SIQnallndlclltor screen. If the signal is good, and you are hearinq the audio when tuned to channellB4, the installation Is Si9nal complete. Now sit back and enjoy Satllilite Radio.
Option 3: Powe((:onnect Installation Instructions 1 Place your radio into the PowerConnecl Vehicle Dock, ali9nin9 the radio a9alnst thl! rear 01 the dock so that the ralls on thl! dOCk fJt into the mountin9 slots in the back 01 the radio. Slide the radio all the way down onto the dock so that it fits firmly. ~[[ Il~ SlRIUSii 0 I ,I, I \'I·II·I·II.lill'I.II.lo, .0 o. lllcn. -- 2 Power on your radio by pressing the Power button.
4 You'll first need to find an available fM channel to listen to the SIRIUS audIo throuqh your vehicle's fM radio. Refer to "How To find Available fM Channels In Your Area" on paqe 48. 5 Ensure that the radIo Is tuned to channellB4. Upon power up, the radio should tune to channellB4 by default, when It's not yet activated. If It's not on channellB4, tune to channellB4. 6 Pick the first fM channel on your list from step 4.
fM channl!1 and then sel your radio to transmit on the same fM channel (steps 6 & 7). If the slQnal reception Is Qood, but there Is no SIRIUS audio when tuned to channel 184, verify that both the radio and your vehicle's fM radio are tuned to Ihe same fM channel (steps 6 & 7). Also ensure Ihe chosen fM channel Is a suitable one to use In your area (step 4). Verify that nothlnQ Is pluQged Into the AUDIO connector on the PowerConnect Vehicle Dock. Reier to "TroubleshootinQ" on paQe 52 for additional help.
How To Find Available FM Channels In Your Area An available fM channel is one that Is not belnQ used by an FM radio station In your area. When you tune your fM radio to an available channel, you should only hear static or silence - not talk or music. Once you have found an available channel, you need to tune your Satellite Radio's built-in transmitter to the same channel to receive SIRIUS sound throuQh your vehicle's radio.
OR 2 Manually tune thrOUQh your local FM channels Manually tune IhrouQh your local FM channels on your vehicle's FM radio. Turn on your vehicle's FM radio. Start .t BS.land use the 'Manual' tune function on your vehicle's fM radio to tune through each FM channel one-by-one (Be.l followM by 8e.3 etc.) to locate channels that aren't belnq used by a local fM radio 5latlon. Wrltt' down each fM channel that has only static or silence on it, until you reach 107.9.
TlPI If you reQularly drive Irom one location to anothff, such as your dally commute, you miY netd to uS\! dilferent FM channels alonQ your route lor best performance. If this Is the case, we r«ommend savinQ the best FM channels as presets on your FM ridio and on your Satellite Radio. Then you simply select and match the but channel for the area you ire In. TIPllt will be much more difficult to lind avallable FM chinnels In IUQe cities than In most suburban or rural loutIons.
Your Vehicle Kit has been designed and built to be trouble-free, but If you experience a problem, try this: • Check that all connections are firm and secure, • Make sure the vehicle power socket is clean and free of corrosion, • Make sure you have connected the radio as described In Ihlslnstallatlon Quide. Verify that the PowerConnect Power Adapter Is pluQQed Into the vehicle's cigarette lighter or power adapter socket and that the LED on the PowerConnect Power Adapter Is lit (on).
If YOu see this on the screen: Try this: Inyalld Channel • Vou hllye lIttempted to tune to a channel that vou hne not SUbscribed to, or does not exist. select a channel to which you have subscrl~d. Flrmwllre Updatlnq • Vour radio Is ~Inq updated over the 1I1r with the latnt soltware. Walt until the update Is done. If this happens: Try this: You do not receive all the SIRIUS chllnnels to Which you subscrIbed '11 you h,lve not ~t lIctlvated your service, reler to tM User Guide which .
If this happens: Trv this: Audio lades or h"s statk: when IlstenlnQ • ChKk "II cables lor" Ilrm and $Kun! connection. '11 you are uslnQ PowerConnect or the FMDA to listen via your vehicle's FM radio, and the problem perslsts,lt most likely Is Interlerence from another commercl.sl or broadcast FM station. You will need to flnd.sn unused or available FM channel In your area. ReIer to HOptlon 3: PowerConnect Inst.sllatlon Instructlons on paQe 43, step 3.
System: Power Requirements: Operating Temperature: Audio Output: 9·16 V DC. 500 mA (mu) 4'r to .140·r (-20'C to .60·C) 1.8 Vrms (max) Radio Oependent PowerConnect Vehicle Dock: Dimensions: Weigl'lt: Audio Connector: Antel'lna Connector: Power Connector: 4.0 In (width) X 2.3 In (height) x 1.2 In (depth) 102 mm (width) x 59 mm (hl!lgl'lt) X 31 mm (depth) 1.601 (46 g) 1/8 In (3.5 mm) female 5MB mall! remlle PowerConnect Power Adapter: Dimensions: Weigl'lt: Input/Output: Cable Length: 3.7 in (width) X 1.
Patent Information It Is prohibited to, and you aQree that you will not. copy, decompile, disassemble. reverse enQlneer, hack, manipulate, or otherwise access and/or make available any technolOQY Incorporated In this product. The music, talk, news, entertainment, data, and other content on thl!' Servlcl!'s are protl!'cted by copyriQht and othl!'r Intl!'lIl!'ctual property laws and all ownership riQhts rl!'maln with the rl!'spl!'ctive content and data sl!'rvlcl!' providl!'rs.
The user 15 cautioned that chanqes or modilications not expressly approved by SIRIUS I XM Radio Inc, can void the user's authority to o~rate this device. This device complies with Part 1S of the fCC Rules. conditions: O~ratlon Is subject to the followlnq two 1. This device may rIOt cause harmtullnterference. Z. This device must accept any Interference recelved.
Hardware and SUbscription $Old separately. Activation tee, otller tees, and taxes required. Inst.llatlon requlrltd with some equipment. Except n speclllnily provldltd, SIRIUS.nd XM R.dlos .nd Accessories .re compatible only with their respective SUbscription service. Subscriptions Qoverned by, as applicable, the SIRIUS Terms &. Conditions av.liable at slrlus.com, or the Xh4 Customer Agreement av.li.ble at xmr.dlo. com. Prices .nd prOllrammlng .re subJeet to ch.nge. SIRIUS U.S. Service ,v.lI.b..
0 0 ~-lli ...
Color-Coded Connections The color-coded PowerConnect Vehicle Dock makes it simple to connect, Just match the colors on the cable ends to the colors on the dock to see what 90es where. Front and Side Views 0 0 """n ¥. "RIUS.... PWR (Red) Connection for PowerConnect Power Adapter. FM ( Blue) Conn echon for 0 pHonal FM 0 irect Adapter (sold separately). DocklnQ Ralls Fits into slots on the rear of the SIRIUS radio to secure the radio. AUDIO (Gr een) Connectio n for Aux tn Cab I.
Choose a Location for Your Radio and Mount It Belore you beQin, you may wanl to have the User Guide lor your Satellite Radio handy, as there are a couple 01 steps where we sUQQest you reference it. If you do not have the User Guide, go to slrlus.com, click on INSTALL. & ACTIVATE, and then click DOCUMENTATION. Click on the User Guide link for your radio. You can use either the Dash Mount or the Window Mount for your radio, depending upon your vehIcle and the location where you want to place your radio.
• Peel off the adhesiYl! liner. Position, press, and hold the Dash Mount and Powereonnec! Vehicle Dock in place lor 30 seconds. IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for alleast 24 hours before using the mount. 6 The dock mounting plate can be tilted in different directions. Adjust as necessary lor your particular vehicle. When the orientation is correct, tighten the knob. IMPORTANTl For clarity, the following Illustrations do nOI show the dock attactled to the mount.
2 Clean the surface with the alcohol preparation pad and let it dry thorouQhly. 3 Attach the Window Mount to the PowerConnect Vehicle Dock usinq the provided screws. IMPORTANTl for clarity. the following illustrations do not show the clock attached to the mount. However. the dock should already be ilttached as stlown In step 3. r----------------, Window Mount 4 Press and hold the mount against the windshield. Then press the lever all the way down to attach the Window Mount 10 the windshield.
Mount the Magnetic Mount Antenna 1 Choose the best location for the Magnetic Mount Antenna considering your vehicle type. Refer to the antenna placement tips and cautions in the User Guide beginning on page 21. • Sedan or Coupe: We recommend mounting the antenna above either the front windshield or the back window. • Pickup Truck: We recommend mounting the antenna above the front windshield. • Convertible: We recommend mounting the antenna at the leading edge of the trunk.
MlIQnetlc Mount Antenn" (Upside-Down) Attach the RUbber Tail to the Magnetic Mount Antenna and press the antenna cable Into the Rubber Tail. Use the Rubber Tilil to position the antenna the correct 3" distance from the edge 01 the roof or trunk lid. Clean the surface of the selected mounting location using the alcohol preparation pad and lei it dry thoroughly. Strain Peel the protective material from the adhesive Relief strips and press the Rubber Taillirm1v Into place on the vehicle for 30 seconds.
Connect the PowerConnect Power Adapter Inserl the Powet1:onnecl Power Adapter into the ciqarette Iiqhler or power adapter socket. Then plug it inlo the red PWR connector on Ihe left side of the dock. Use only the provided Powet1:onnecl Power Adapter. Place Your Radio in the PowerConnect Vehicle Dock Place your radio into the PowerConnect Vehicle Dock. aligning the radio against the rear of the dock so that the rails on the dock llt into the mounting slots in the back of the radio.
Choose and Setup Your Audio Connection Option Connect your radio to play the aUdio through your vehicle's stereo system or rM radio using one of the following options: • Best: Use the included AuJ. In Cable il your vehicle's stereo system has an auxiliary input connection. Plug one end of the cable Into the green AUDIO connector on the right side 01 the PowerConnect Vehicle Dock and the other end into the vehicle stereo system's auxiliary input Jack.
Tune your Radio and Vehicle F"M Radio to the Same F"M Channel 1 Find an Available F'M Channel in Your Area An available FM channel is one that's not being used by an FM radio station in your area. When you tune your FM radio to an available channel, you should only hear static or silence - not talk or music. We recommend one of the following methods to find an available FM channel: a Use the SIRIUS I XM F'M Channel Finder at www.slrlus.comjfmchanneI.Gotothe website and enter your lip code.
SIRIUS 12 Month Limited Warranty What this Warranty Covers This warranty covers defects in material and workmanship for 12 months from the date of purchase by the original retail purchaser only. SIRIUS XM Radio Inc. ("SIRIUS"), at its sole option, will repair or replace the product with a new or reconditioned product without charge for parts and labor. Products replaced under this warranty become the property of SIRIUS.
