User's Manual

Updating Helix Firmware

ENG

Updating Helix Firmware

DRAFT DRAFT

Occasionally we make improvements to the Helix firmware, which is the software that makes

your Helix work. Updating the firmware is a quick and easy process.

Remember that:

 Your Helix must be docked in its cradle with a power adapter and must be connected to

your PC

 Your PC must be connected to the Internet

Using XM+Napster

If you have installed and use XM+Napster, it automatically checks the firmware when you

connect Helix to your PC. XM+Napster notifies you when it’s necessary to update the

firmware. Simply follow the instructions.

Don’t worry if you miss a firmware update. XM+Napster will always check whether your Helix

needs an update or not.

Using the Update Tool

If you don’t use XM+Napster, you can

update the Helix firmware manually.

1. Insert the XM+Napster CD in your PC’s

CD-ROM or DVD drive. The XM+Napster

software should start automatically.

2. Click on Browse CD.

3. Click on Utils, then click on

XMFirmwareUpdateClient.

4. Follow the instructions on the PC

screen.

You can run this firmware update tool at

any time. If the firmware needs to be

updated, the tool will install it automati-

cally. If the firmware is already up-to-date,

nothing happens.

10707xm Helix User Manual-Eng 2/7/06 2:29 PM Page 64