User's Manual

26
Setting-up the FM Transmitter
Your SkyDock has a PowerConnect FM transmitter
that will ‘broadcast’ its audio to your vehicle’s
FM radio if you have not used the included audio
cable to connect the SkyDock to your vehicle’s
audio system.
N
OTE
: F
OR
COMPLETE
DETAILS
ABOUT
SETTING
THE
FM
TRANSMITTER
,
SEE
FM TRANSMITTER
,
ON
PAGE
48.
1. Press-and-hold the SkyDock’s FM button. The
FM Settings
screen will appear. Tap the
On/Off
button to turn the FM transmitter OFF.
2. Tune through your vehicle radio’s FM channels
to find an FM channel (between 87.9MHz and
107.9MHz) that is not broadcasting in your
area. (If you use an FM channel that is being
used by a local broadcaster, it will interfere
with your SkyDock’s performance.)
3. Once you have located an FM channel that
is not broadcasting in your area, save it as a
preset on your vehicle radio. This will become
your SkyDock preset.
4. Tap the
On/Off
button on the SkyDock’s
FM Settings
screen again to turn the
FM transmitter ON. The first preset (factory-set to 88.1MHz) will be highlighted.
This may not be the best frequency for your area.
FM Settings
Screen
Vehicle Installation
Press
and Hold
FM Button
SkyDock
FM
Button