User's Guide

34
Using Your Snap
2 Rotate the Control knob to select the desired FM channel.
3 Press and hold a number button 1-5 until the preset number (1-5)
is displayed. The FM channel is now set as an FM preset.
4 To exit, press the FM button or wait 10 seconds until the Snap
exits to the main display screen.
To access an FM preset:
1 Press the FM button on the top of the Snap. It will light to indicate the FM transmitter is
on.
2 Press the 1-5 button which contains your FM preset. The radio will tune to the FM preset
and the number button corresponding to the preset will be illuminated.
3 To exit, press the FM button or wait 10 seconds until the Snap exits to the main display
screen.
IMPORTANT! You need to ensure that your vehicle’s FM radio is tuned to the same FM channel.
TIP! Be sure complete the FM functions while the FM button is illuminated.
TIP! To configure your preset FM channels, you need to find available FM channels in your area.
Follow step 1 in ”Option 3: PowerConnect Installation Instructions” on page 23 to find available FM
channels.
FM 90.1
FM1