User's Guide

33
Tuning FM Channels
When using PowerConnect, you can tune to an FM channel to match the FM channel of your
vehicle’s stereo system.
To tune an FM channel:
1 Press the FM button on the top of the Snap. The FM button illuminate to indicate the FM
transmitter is on, and the display will show the current FM channel.
2 Rotate the Control knob to select the desired FM channel.
3 To exit, press the FM button or wait 10 seconds until the Snap exits to the main display screen.
FM Presets
FM presets make it easy to store FM channels and then quickly access them..
Use FM presets when you use PowerConnect to listen to your Snap through your vehicle’s
FM radio. (Refer to “Option 3: PowerConnect Installation Instructions” on page 23 for more
information.)
To store an FM preset:
1 Press the FM button on the top of the Snap. The FM button will illuminate to indicate the FM
transmitter is on, and the display will show the current FM channel.