User's Guide

29
Navigation Basics
Power Button
Pressing the Power button turns the Snap On or Off.
Control Knob
Rotating the Control knob clockwise or counter-clockwise browses and selects channels
within a category. It is also used to tune to an FM channel, and to change the audio level.
Scan Button
Pressing the Scan button starts a scan through the channels in the current category.
Each channel plays for 10 seconds. Pressing the Scan button again stops the scan and
the radio tunes to the last channel being scanned.
Previous/Next Category Buttons
Pressing the Previous or Next Category button selects the previous or next category.
Pressing and holding cycles through the categories.
Menu Button
Pressing menu once displays the Radio ID of your Snap. Pressing menu again displays the
Audio Level option.
MENU