User's Guide

25
5 Press the FM button or wait 10 seconds to exit the FM setup. Proceed to “Subscribe” on
page 26.
6 The audio level output of the Snap can be increased or decreased as necessary to match
the audio levels of other sources in your vehicle. Refer to “Set Audio Level” on page 35.
7 If the signal reception is good, but there is no audio when tuned to channel 247, verify that
both the Snap and your vehicle’s FM radio are tuned to the same FM channel (steps 2 & 3).
Also ensure the chosen FM channel is a suitable one to use in your area (step 1). Also be
sure that the audio level is set high enough to be heard (step 6). Refer to “Troubleshooting”
on page 38 for additional help.