User's Guide

43
Option 3: PowerConnect Installation Instructions
1 Insert the dock into the mount.
2 Insert your Radio into the dock.
3 Power on your Radio sliding the
Power/Lock switch down.
4 Be sure the vehicle is outside and the
antenna has a clear view of the sky.
Verify that you are receiving the XM
signal. There should at least be one bar on the
main display screen that denotes antenna signal
strength. You can also refer to the User Guide
which accompanied your radio, and display
the Antenna Aiming screen. The Satellite and
Terrestrial bars show the strength of the signal
being received. If the signal
reception is good, repeatedly
press back to return to the
main display screen. You
are ready to make the audio
connection.
5 You’ll now need to find
an available FM channel
to listen to the XM audio
through your vehicle’s FM
ANT
FM
AUDIO
PWR