User's Guide

42
Vehicle Installation
signal being received. If the signal
reception is good, repeatedly press back to
return to the main display screen.
7 Ensure your radio is tuned to channel 1.
Upon power up, your radio should tune
to channel 1 by default, when it’s not yet
activated. If it’s not on channel 1, refer to
the User Guide which accompanied your
radio to learn about how to tune a channel.
8 If you haven’t done so, turn on your
vehicle’s stereo system. Set it to play input
from the cassette source.
9 You should hear XM channel 1 through your vehicle’s stereo system.
Now sit back and enjoy Satellite Radio.
10 The audio level output of the radio can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle.
Refer to the User Guide which accompanied your radio for instructions.
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle’s stereo system is set to the correct source, i.e., cassette source
(step 8). Also be sure that the audio level is set high enough to be heard (step 10).
Refer to “Troubleshooting” on page 52 for additional help.