User's Guide

40
Vehicle Installation
and Terrestrial bars show the strength of
the signal being received. If the signal
reception is good, repeatedly press back to
return to the main display screen.
7 Ensure that your radio is tuned to channel
1. Upon power up, the radio should tune
to channel 1 by default, when it’s not yet
activated. If it’s not on channel 1, refer to
the User Guide which accompanied your
radio to learn about how to tune a channel.
8 Turn on your vehicle’s stereo system. Set
it to play input from the auxiliary input
source.
9 You should hear XM channel 1 through your vehicle’s stereo system.
Now sit back and enjoy Satellite Radio.
10 The audio level output of the radio can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle.
Refer to the User Guide which accompanied your radio for instructions.
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle’s stereo system is set to the correct source, i.e., auxiliary input
source (step 8). Also be sure that the audio level is set high enough to be heard
(step 10). Refer to “Troubleshooting” on page 52 for additional help.