User's Guide

64 65
Using your Xpress
RCi
Scanning Channels in a Category
You can scan a category and listen to each channel for 3 seconds before the next
channel is automatically tuned. If you want to stay tuned to a channel and stop the
scan, just press the Select button.
To scan a category:
1. Press
or until the desired category is displayed.
2. Scroll down to highlight the next to last item in the category which will
be Scan and the category name.
3. Press the Select button. The scan will begin.
4. Press the Select button to stop the scan and listen to the channel that
was last scanned.
FM Presets
FM presets make it easy to quickly access stored FM channels and choose a new
FM channel from them.
Use FM presets when you use PowerConnect to listen to your Xpress
RCi
through your vehicles FM radio. (Refer to “Option 3: PowerConnect
Installation Instructions” on page 45 for more information.)
To start using a different FM preset:
1. Press and hold menu until
FM Channels is displayed.
2. Scroll to highlight the
desired FM preset and press
the Select button.
3. The new choice will be
confirmed and the Xpress
RCi
will tune to the chosen FM
preset. Press the Select
button to return to the main display screen.
IMPORTANT! You need to ensure that the FM Transmitter in the Xpress
RCi
is
turned On, and that your vehicles FM radio is tuned to the same FM channel.
TIP! To configure the list of preset FM channels, you need to find available
FM channels in your area. Refer to ”Find Available FM Channels in Your
Area” on page 87. Next, refer to “Set and Select FM Channels” on page 92
to program your FM presets.