User's Guide

40 41
Option 1: Aux In Cable Installation Instructions
1 Plug one end of the Aux In Cable into the green AUDIO connector
on the dock.
2 Plug the other end
into the auxiliary input
jack connection of
your vehicle’s stereo
system.
3 Insert the dock into the
mount.
4 Insert your Xpress
RCi
into
the dock.
5 Power on your Xpress
RCi
by pressing the
Power button.
6 Be sure the vehicle is outside and the antenna
has a clear view of the sky. Verify that you are
receiving the XM signal. There should at least
AUDIO ANT PWR FM OUT
Vehicle Installation
Step 6: Connect the Audio
To play audio through your vehicle’s stereo or FM radio, decide on one of the
following audio connection options:
•Option1: Best: Use the Aux In Cable if your vehicle’s stereo system has an
auxiliary input connection. Refer to your vehicle’s owners manual to find
the location of the auxiliary input jack, or consult the vehicle dealer.
TIP! The auxiliary input jack may be located on the face plate of the vehicle
radio, on the back of the radio, anywhere on the front dash panel, inside the glove
compartment, or inside the center console in between the front seats.
•Option2: Better: Use a Cassette Adapter if your vehicle has a built-
in cassette player. Cassette Adapters are sold separately and can be
purchased from an electronics retailer, or go to xmradio.ca/accessories.
•Option3: Good: Use the PowerConnect feature in the Xpress
RCi
.
PowerConnect plays the audio through your vehicle’s FM radio.
•Option4:Best:Use the FM Direct Adapter. If none of the previous three
audio connection options will work in your vehicle, then you will need to
use the FM Direct Adapter (FMDA) (sold separately). The FMDA needs to be
installed by a professional installer and directly connects the Xpress
RCi
to
your vehicle’s FM radio.
Follow the installation instructions in the next several sections for the audio
connection option that you have selected.