User's Manual

Settings
Settings
79
78
Settings
Restoring Factory Defaults
To restore all XM2go settings and preferences to a “factory fresh” state:
1. Select XM  Settings  Setup  Factory Defaults.
2. You should see this display:
3. Confirm by selecting Yes, or cancel by selecting No.
Restore just the settings to
factory defaults.
Restore settings to factory
defaults and erase all music.
Memory Partition
The internal storage in XM2go can store recorded XM content and MP3/WMA files. By
default, the storage is divided 50/50, but you can select different memory partitions:
To change the memory partition:
1. Place your XM2go into the home dock and connect the AC power adapter.
2. Select XM  Settings  Setup  Memory Partition.
3. Highlight the desired setting and press the XM button.
4. Confirm by selecting Yes, or cancel by selecting No.
typical storage for content typical storage for PC
recorded from XM (MP3 and WMA) tracks
50/50 XM/PC files 25 hours 8 hours
100% XM 50 hours 0 hours
CAUTION: When you change the memory partition, you will erase all your stored XM content
and MP3/WMA tracks from your XM2go.
setting