User's Manual

Using your XM2go with a PC

Transferring Between PC and XM2go

To transfer a track or playlist from your PC to your XM2go, drag and drop the track or playlist

into the “transfer” pane on the lower right-hand side of the XM+Napster application.

You can only transfer songs that you have purchased from XM+Napster or songs that you

have ripped from your audio CDs. XM2go only recognizes file names that use single-byte

characters; double-byte and multi-byte character sets (Asian languages such as Chinese,

Korean, or Japanese) are not supported.

WARNING: Though you can transfer non-MP3/WMA files to your XM2go using Windows,

those files cannot be played as audio files. Furthermore, do not attempt to format the XM2go

storage; doing so may cause damage to the device.

Disconnecting Your XM2go From the PC

Before you remove your XM2go from its dock or unplug the USB cable from the dock or the

PC, you must disconnect using one of the following methods:

 In Windows: right-click on the Safely Remove Hardware icon , which is on the

right side of the Windows taskbar. Select “USB Mass Storage Device,” and click on Stop.

 On XM+Napster: click on the Disconnect Device icon

or select File/Disconnect portable device.

If you want to connect XM2go to your PC again, re-insert XM2go into its dock.