User's Manual

Using your XM2go

3. To edit an existing session, select XM  Record  Schedule Recording. You will see

a list of sessions. Highlight the session you wish to edit.

You may not see all the sessions that you scheduled in the past. Sessions that have expired

are automatically removed from the list.

4. Choose Edit Session to change the session’s options.

5. To delete a session, choose Cancel Session.

At the scheduled time, your recording session will begin and change channels if needed.

Remember that when you schedule a recording session, you are instructing XM2go to switch

to the desired channel.

 NOTE: Scheduled recording sessions will begin only if XM2go is put in a home dock or in a

boombox with AC power. Your XM2go can be powered off or on. Make sure your XM2go can

receive a strong XM signal!

Listening to Your Recorded XM Content

(My Music)

When you see “My Music” at the top of the display, you’re listening to XM content that you

have recorded and any MP3/WMA files you have transferred to your XM2go.

1. To switch to “My Music” from “Live XM,” press the Mode button.

2. Press the up and down arrow buttons to view a list of songs that you have stored on

XM2go. Highlight the song you want to listen to, then press XM  Play to start playing

from that song.

3. You can press the right arrow button to skip to the next song. Press the left arrow button

to skip to the previous song.

4. While you’re listening to a song, you can also press and hold the right arrow button to

fast-forward through that song. Press and hold the left arrow button to reverse through

the song.

 NOTE: In order to access your XM content you have recorded on XM2go, you must (1)

maintain an active XM Satellite Radio subscription, and (2) receive the live XM signal at least

8 hours a month.