User's Manual

Using your XM2go

Recording a Channel

1. While you’re listening to live XM, select XM  Record  Rec Channel. You will record

the channel you’re currently listening to.

2. To stop recording at any time, select XM  Record  Stop Recording. If you change

channels, XM2go automatically stops recording.

3. You can choose to stop recording at the end of the song you’re currently listening to by

selecting XM  Record  Record Song.

Scheduling a Recording Session

You can set XM2go to record XM at a later time. When you schedule a recording session,

remember that XM2go must be able to receive a live XM signal when the session begins.

1. To schedule a recording session, select XM  Record  Schedule Rec  New

Session.

2. The “Scheduled Rec” display allows you to set various options. Use the up and down arrow

buttons to adjust each entry. Press the left or right arrow buttons to move to the previous

or next option.

You can choose to schedule a session for

“Today,” ”Everyday,” or a specific “Date.”

Set start and stop times using the up and

down arrow buttons. If the session length

exceeds the available memory, you will

record over the oldest XM tracks in the

memory, so you’ll always have the latest

content.

Choose the channel you want recorded.

You can enter the channel number using

the remote’s numeric keys.

Choose “OK” to save the session or

“CANCEL” to start over.

XM2go informs you if there is a scheduling conflict such as overlapping sessions.