User's Manual

Using your XM2go

Live XM

Turn on your XM2go. Subscribe to XM (page 18) if you haven’t done so already.

If you see “XM” at the top of the display, you’re listening to XM content that is currently

being broadcast from the satellites.

If you see “My Music” on the display, you’re listening to recorded XM or MP3/WMA tracks.

Press the Mode button to switch to “Live XM.”

Selecting Channels

Press the up or down arrow buttons to scroll through the list of channels.

- OR –

Press the number keys on the remote that correspond to the channel number.

- OR –

1. Press the left arrow button on your XM2go. You will see a virtual keypad on the display.

2. Use the arrow buttons to select the

digits corresponding to the channel

number. Press the XM button after

highlighting each digit.

3. When you’ve entered a valid channel

number, your XM2go will tune to that

channel within 2 seconds.

 NOTE: You must receive a live XM signal for at least 8 hours a month (not ina continuous

listening session and may be split over several listening sessions). This authenticates your XM

subscription and ensures that you can continue to enjoy your recorded XM content and live XM

programming. If you do not dock your XM2go as described, you will lose access to your recorded

content and live XM programming.