User's Manual

Select button.

4. Press to scroll to and highlight the storage location (FM 1 to

FM 5) you want to set and press the Select button. You can choose

among the following options:

i. If the chosen storage location is empty (denoted by “---“), or if

the storage location contains the FM preset currently being used

(denoted by “current”), then the FM channel tuning screen is

displayed.

ii. If the chosen storage location has

an FM preset that is not currently

being used, and you want to edit it,

Edit Channel is highlighted. Press

the Select button. The FM channel

tuning screen is displayed.

iii. If the chosen storage location has

an FM preset that is not currently

being used, and you want to start

using it, press to highlight Start

Using and press the Select button.

Skip to step 7.

5 Press and to tune to the desired

FM channel in steps of .2, i.e., 99.3 to

99.5. Press and to tune to the

desired channel in steps of 1, i.e., 99.3

to 100.3. Press the Select button to

select the FM channel.

6 If you are editing the storage location

that has the “current” FM preset, skip

Set your vehicle radio to the

above channel to enable audio.

99.3 FM

Edit FM Channel 2

99.3 FM

and Select to confirm

Press arrow keys to tune

Conﬁguring Your Onyx Plus