Plus USER GUIDE Dock & Play Radio with Vehicle Kit 24 A0 Album Art Artist Name Song Title bA
Table of Contents Compatibility. . . . . . . . . . . . . . . . . . 4 Introduction. . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety and Care Information. . . . . . . . . . 6 What’s in the Box? . . . . . . . . . . . . . . . . . . 8 Onyx Plus Functions. . . . . . . . . . . . . . . . . 9 PowerConnect Vehicle Dock. . . . . . . . .
Table of Contents FCC Statement . . . . . . . . . . . . . . . 111 Copyrights and Trademarks. . . . . 112 Owners Record . . . . . . . . . . . . . . .
Compatibility The XDPIV2 Vehicle Dock included with your Onyx Plus is compatible with the AMPS dash and vent mounts included with your Onyx Plus, as well as the T-Slot dash and vent mounts (previously included with Onyx). The AMPS mounting accessories are not compatible with the previous version of the Vehicle Dock, XDPIV1. The XDPIV2 Vehicle Dock can be identified by a label, and the four AMPS mounting points, both on the rear of the dock.
Introduction Features Thank you for purchasing the SiriusXM Onyx Plus with Vehicle Kit! SiriusXM Onyx Plus has these exciting features to enhance your overall experience: • Hear SiriusXM through your existing vehicle radio with easy, do-ityourself installation. • Pause, rewind and replay up to 30 minutes of live satellite radio. • View artist name, song title, and channel information on the large color display. • Store up to 20 of your favorite channels for one touch access.
Introduction Safety and Care Information IMPORTANT! Self installation instructions and tips are provided for your convenience. It is your responsibility to determine if you have the knowledge, skills, and physical ability required to properly perform an installation. SiriusXM shall have no liability for damage or injury resulting from the installation or use of any SiriusXM or third party products.
Introduction Warning! • Opening the case may result in electric shock. • If the liquid crystal fluid comes in contact with your skin, wipe the skin area with a cloth and then wash the skin thoroughly with soap and running water. If the liquid crystal fluid comes into contact with your eyes, flush the eyes with clean water for at least 15 minutes and seek medical care. If the liquid crystal fluid is ingested, flush your mouth thoroughly with water. Drink large quantities of water, and induce vomiting.
Introduction What’s in the Box? FM menu alerts t-mix t-scn twx 1 2 3 4 5 6 7 8 9 0 Onyx Plus Radio b/# PowerConnect™ Vehicle Dock Dash Mount Aux In Cable Screws (4) Vent Mount and Extended Vent Clamps Cable Routing Adapter PowerConnect Power Adapter 8 Magnetic Mount Antenna Antenna & Dash Mount Alcohol Preparation Pads
Introduction Onyx Plus Functions Up and Down Buttons Press to preview and tune to channels through the channel lineup; also press to scroll through lists and highlight items in lists. Left and Right Buttons Press to search for channels by category. FM Plus menu alerts t-mix t-scn twx 1 2 3 4 5 6 Number Buttons Press to tune to a stored favorite channel; Press and hold to store a favorite channel. Also used to enter channel numbers when the Direct button is pressed.
Introduction PowerConnect Vehicle Dock Color-Coded Connections The color-coded PowerConnect Vehicle Dock makes it simple to connect. Just match the colors on the cable ends to the colors on the dock to see what goes where. Rear View AUDIO AUDIO (Green) Connection for Aux In Cable or optional Cassette Adapter (sold separately). 10 ANT PWR ANT (Silver) Connection for the Magnetic Mount Antenna. FM PWR (Red) Connection for PowerConnect Power Adapter.
Introduction Wire Guide The PowerConnect Vehicle Dock has a wire guide at the top rear that can help you to organize the cables and wires connected to the dock. If you need to bring a cable or wire from one side of the dock to the other, utilize the wire guide by looping the cable though the wire guide as shown.
Vehicle Installation WARNING! DO NOT attempt to install Onyx Plus while driving. Park your vehicle in a safe location before beginning installation. Step 1: Choose a Location for Your Radio When installing Onyx Plus in your vehicle, choose a location where it will not block your vision, interfere with the controls, or obstruct the air bag.
Vehicle Installation Option 3 Option 4 A. menu FM jump 1 2 3 4 5 6 7 8 9 0 direct A. menu FM 1 Option 5 2 jump 3 4 5 6 7 8 9 0 direct Option 6 B. B.
Vehicle Installation Step 2: Install the Adhesive or Vent Mount Follow the instructions on the next several pages for the mounting method you have selected. Installing the Adhesive Mount: CAUTION! The adhesive used on the Adhesive Mount may be difficult to remove. Do not install this mount on leather surfaces (contact your automobile dealership if you are unsure about your dash surface), and make sure the air temperature is at least 60°F (15°C) during installation.
Vehicle Installation tighten the knob. Knob Adhesive Foot Dock Mounting Plate 4. Attach the Adhesive Mount to the PowerConnect Vehicle Dock using the 4 provided screws. 5. Before you attach the Adhesive Mount to the dash, skip ahead and finish the remainder of the vehicle installation so that the cables are attached to the dock. PWR AUDIO FM ANT 6. Once the cables have been attached to the dock, clean the mounting surface in the vehicle with the alcohol preparation pad and let it dry thoroughly. 7.
Vehicle Installation Installing the Vent Mount: IMPORTANT! To make the cable connections easier, wait until after you have connected all the cables to the dock before you attach the Vent Mount to a vent. 1. Locate a vent with horizontal louvers sturdy enough to hold your PowerConnect Vehicle Dock and Onyx Plus Radio. 2. If the vent louvers in your vehicle are recessed, you may need to use the longer vent clamps with the Vent Mount.
Vehicle Installation 3. Attach the Vent Mount to the PowerConnect Vehicle Dock using the 4 provided screws. 4. Before you attach the Vent Mount to the vent, skip ahead and finish the remainder of the vehicle installation so that the cables are attached to the dock. PWR AUDIO FM ANT Note! For greater clarity, the next illustration does not show the dock attached to the Vent Mount, however, the dock should be attached before continuing. 5.
Vehicle Installation Step 3: Mount the Magnetic Mount Antenna Mount the Magnetic Mount Antenna on the outside of your vehicle, on a horizontal surface that will always face the sky. The antenna contains a strong magnet which will stick to any metal part of your vehicle, but will not damage the vehicle. To install the Magnetic Mount Antenna: 1. Choose the best location for your antenna considering your vehicle type.
Vehicle Installation SUV: We recommend mounting the antenna at the rear of the roof as shown. Convertible: We recommend mounting the antenna at the leading edge of the trunk as shown. Pickup Truck: We recommend mounting the antenna just above the front windshield as shown. IMPORTANT! Consult a professional installer if your vehicle roof or hood is non-metallic (i.e., fiberglass), or you have difficulty finding a location for your antenna. 2.
Vehicle Installation 3 If you are installing the antenna at the roof edge, or hood edge, install the Cable Routing Adapter to direct the antenna cable downward.
