User's Manual Part 1

Vehicle Installation

Step 2: Install the Vent or Dash Mount

Depending on your situation, you can either choose to use the Dash Mount or the

Vent Mount.

Installing the Dash Mount:

CAUTION! The adhesive used on the Dash Mount may be difficult to remove. Do

not install this mount on leather surfaces and make sure the air temperature is at

least 60ûF (15ûC) during installation.

1 Locate a flat surface for the Dash Mount. Make sure

there is ample room for the PowerConnect Vehicle Dock

and Stratus 6 when installed.

2 Set the orientation of the Dash Mount before adhering

it. Loosen the knob and adjust

the adhesive foot for the location

you selected in “Step 1: Choose

a Location for Your Radio” on

page 14:

•Option 1 & 3 should be oriented

as I.

•Option 2 should be oriented as II.

3 Attach the Dash Mount to the

PowerConnect Vehicle Dock using the

provided screws.