User's Manual

Listening to XM

Activating Your roadyXT

Use the arrow buttons to find channel 0, then push the “select” button to

choose it. You should see an 8-character XM Radio ID in the display. (The

XM Radio ID should also be on the bottom of your roadyXT, and on the

package.) Write the ID here:

Activate your XM Satellite Radio service by contacting XM at

http://activate.xmradio.com or by calling 1.800.XM.RADIO (1.800.967.2346).

You will need the XM Radio ID and a major credit card.

XM will send a signal from the satellites to activate the full channel lineup.

Activation normally takes 10 to 15 minutes, but during peak busy periods,

you may need to keep your roadyXT on for up to an hour to complete the

activation process. When you can access the full channel lineup on your

roadyXT, you’re done!

Listening to XM

Selecting channels

Select a channel directly by entering its channel number. Press the

“pre/dir” button (step 1) until appears on the screen. Then press the

number buttons (step 2) corresponding to the channel. Channel 12 can be

entered as “1,” then by “2,” or as “0,” “1,” and “2.”

Or press the up and down arrows to quickly step through each channel.

When you find one you like, press the “select” button.

Warning: When using this product it is always

important to keep your eyes on the road and your hands

on the wheel. Not doing so could result in injury and/or

death to yourself or to others and/or in property damage.

Warning: Failure to properly follow all installa-

tion instructions may result in personal injury, death,

and/or damage to your roadyXT, accessories, and/or to

your vehicle or property.

Warning: When using this product it is always important to keep your eyes on the road and your hands on the

wheel. Not doing so could result in injury and/or death to yourself or to others and/or in property damage.

Note: Carefully check your XM Radio ID. The letters I, O, S, and F are not used.

Step

RoadyXT_manual layout xm 7/13/05 8:11 AM Page 10