User's Manual

Setting up
Assemble your MyFi and its
home stand as shown
below; plug the AC adaptor
into an outlet. Let the
battery charge for at least
three hours.
Turn on your MyFi by
pressing the power button.
You should be able to hear
Channel 1, the XM Preview
Channel. If you do not, and
the screen displays “NO
SIGNAL,” try moving your
MyFi's antenna to another
location. Make sure the
antenna points south
outdoors or through a
window. To maximize the
signal, refer to “Aiming the
home antenna” (page ##).
Activate your MyFi
Assemble Home Stand
Connect to Stereo
Aim Antenna
Connect to Stereo
Plug the AC adaptor into an outlet. Connect the home antenna and
connect the line out to either your home stereo or powered (PC type)
speakers.