User's Manual

The display does not change or
the backlight does not turn on
or turn off.
Reset your MyFi by following
the procedure above.
Battery level meter doesn't
match the charging or playback
time.
Fully charge the battery, then
use your MyFi until the battery
is fully exhausted. This calibrates
the battery level meter.
If this happens: You should:
Your MyFi's controls do not
respond.
You may have locked the
controls. Check whether the
lock indicator is being displayed.
If so, unlock the controls by
pressing and holding the
“mute/pause/lock” button until
the lock indicator disappears
(see page ##).
If you have unlocked the
controls and they still do not
respond, reset your MyFi by
carefully inserting the tip of a
paper clip into the “RESET” hold
under the battery cover. You can
also reset your MyFi by
removing and reinserting the
battery.