User's Manual

Other Things You Should Know
Care
You should be able to take your MyFi along with you during most of
your daily activities. Still, you should remember:
" Your MyFi is not waterproof. Avoid splashing it with liquids and
never submerge it underwater.
" Take your MyFi with you when you leave your vehicle, especially on
a hot day. Not only can you continue to enjoy XM programming, but
you'll also prolong the life of your MyFi's case, display, and battery.
" If your MyFi does get dirty, wipe the case with a soft cloth lightly
moistened with water, then wipe dry with another cloth. Avoid
chemicals such as paint thinner, alcohol, or abrasive cleansers.
Important Battery information - Please Read
Your MyFi's battery should be
charged before you use the radio.
The amount of charge is indicated
by the battery level meter in your
MyFi's display. When you're
charging the battery, you will see
a “+” in the meter; when the
battery is exhausted, you will see
a “-“ in the meter.
When you use your MyFi for the
first time, charge the battery until
the meter indicates it's fully
charged. Then use your MyFi
until the battery is exhausted. This
charge/discharge cycle calibrates the battery level meter so that it
accurately reports the state of the battery.
Your battery performs best when used and charged in an ambient
temperature of between 50°F to 90°F (10°C to 32°C). Do not leave
your MyFi inside a hot vehicle or in direct sunlight.
Batteries gradually wear down and require longer charging times.
When a battery no longer holds its charge, you should purchase a
new battery. Always use authorized Delphi batteries and power
adaptors.
To prevent injuring yourself or damaging your MyFi, do not
disassemble, crush, or puncture the battery. Never allow metal to
touch the battery terminals.
<recycle logo>
Your MyFi's rechargeable battery should be disposed of properly
and may need to be recycled. Contact your local recycler for details.
Never dispose of batteries in a fire or water as they may explode.
To remove the battery, follow these steps as shown below. Use the
clear tab to help you pull the battery out.