User's Manual

Using MyFi at Home
Turn off your MyFi and your audio system. Connect your MyFi to your
audio system in either way illustrated below.
If you use the home stand and connect it to a stereo, you must plug
in the AC adaptor and home antenna. Your MyFi's audio output will
not work if these are not connected.
If you attach your MyFi
to powered speakers,
adjust the audio level
using the speakers'
volume control.
TIP: If you hear nothing,
try adjusting the volume
controls located on the
MyFi. If there does not
appear to be power,
check all connections
and make sure all plugs
are inserted completely.
Aiming the home antenna
Your MyFi can help you aim the home antenna to pull in the
strongest signal available.
1. Using the “menu” button and dial,
choose “ Antenna Aiming.”
2. Slowly turn and tilt the antenna. The
signal bars on the display will
change. Find the position that gives
at least two bars on either “satellite”
or “terrestrial.”
3. The antenna aiming screen remains as long as it's needed to help
you position the antenna. When you've found the best position,
press the “menu” button to return to normal operation.