User's Manual

Personalizing Your MyFi
You can easily adapt your MyFi to the way you listen and use the
satellite radio. You can change how the display appears, track stocks
and other information, adjust your MyFi's audio output, and change
how you use the display.
Simply press the “menu” button, rotate the dial to highlight an
option, and press the dial in to select. Your MyFi guides you with
instructions right on the screen.
If you ever get lost or decide not to change anything, press “menu” to
return to normal operation. Or wait for about 15 seconds and your
MyFi reverts back by itself.
Adjusting audio
You can ADJUST THE BASS OR TREBLE, which affects both the
headphones and audio outputs of the home stand and vehicle
cradle.
1. Press the “menu” button and use
the dial to select “Set Audio.”
2. Select “Set Tone.”
3. Rotate the dial to highlight either
“bass” or “treble.” Press the dial in
to select.
4. Rotate the dial to change the bass or
treble level. Press the dial in to confirm.
5. When you're done, press the “menu”
button until you return to normal operation.
To CHANGE THE VOLUME LEVEL of the cassette adaptor, FM
transmitter, or line-level audio output:
1. Press the “menu” button and use the dial to select “Set Audio.”
2. Select “Line Out Level”. Your MyFi can detect when you're using the
FM transmitter or cassette adaptor and will make the appropriate
changes to the settings.
3. Rotate the dial to change the audio level. Press the dial in to
confirm.
4. When you're done, press the “menu” button until you return to
normal operation.
Normally, your MyFi's buttons beep whenever you press them. You
can turn the sound off by setting the following option:
1. Press the “menu” button and select “Set Audio” using the dial.
2. Select “Button Tone.”
3. Select “Off” to turn the button tone off, or select “On” to turn it back
on.