User's Manual

TIP: You can use the number buttons to
enter a channel number. You can use
the up, down, and XM buttons on the
remote to enter time and make
selections.
5. Set up the second session, if you
desire. The combined time for both
sessions should not exceed 5 hours in one day and the sessions
should not overlap each other. Your MyFi will advise you if either
condition occurs, and will give you another chance to schedule the
sessions.
6.Turn off your MyFi and be sure it is plugged in to the home stand.
When the session starts, the display will show “Session 1 (or 2)
Recording.” If your MyFi is already on when the session is
supposed to start, MyFi skips the session and does not interrupt
your listening. When the session starts, it writes over the oldest
stored content first, ensuring that you're always listening to the
freshest programming.
NOTE: You will only be able to store a session if the MyFi is turned off
and plugged in to the home stand with the AC adaptor connected
and receiving power. The home stand should also have the home
antenna connected to ensure that your MyFi has strong signal
during the scheduled session.
7. To erase the stored content, choose the “Clear My XM” option
under the “My XM” menu. All previously recorded content can no
longer be accessed.