User's Manual

Listening to XM
Changing channels
1. Rotate the dial to preview a list of channels.
2. When your desired channel is highlighted, press the dial in to
select that channel.
-OR-
1. Press the “pre/dir” button until the word “DIRECT ENTRY” flashes in
the display.
2. Press the number keys corresponding to a channel number. For
channel 8, press “8.” For channel 130, press “1,” then “3,” then “0.”
-OR-
1. Press the “<<” or “>>” buttons while in “LIVE” mode. You will see the
channels organized by category.
2. Rotate the dial to highlight a
channel. Press in the dial in to select
that channel.
Saving favorite channels
into presets
Your MyFi can store up to 30 of your favorite channels as presets. The
presets are organized into 3 banks (A, B, or C) that each contain 10
presets.
To save a channel into a preset:
1.Tune to the channel using the dial or
by entering the channel number.
2.Press the “pre/dir” button until
“PRESET A,” “PRESET B,” or “PRESET C”
appears in the display.
3.Press and hold a number key to save
that channel into that preset. For
example, by pressing and holding the
“3” key, you can save channel 45 into
the “A-3” preset. The “0” key is used for
the tenth preset.
To recall a preset:
1.Press the “pre/dir” button until “PRESET A”, “PRESET B”, or “PRESET C”
appears in the display.
2.Press the number key corresponding to your desired preset. In the
example, press the “3” key and your MyFi should tune to channel
45.
1
2