User's Manual

Turn the dial to highlight channel 0, and press the dial in to select it.
You should see an 8-character XM Radio ID in the display. (The XM
Radio ID should also be on your MyFi's package and under the
battery.) Write the ID here:
The XM Radio ID does not use the letters I, O, S, and F.
Activate your XM Satellite Radio service by contacting XM at
http://activate.xmradio.com or by calling 1.800.XM.RADIO
(1.800.967.2346). You will need the XM Radio ID and a major credit
card.
XM will send a signal from the satellite to activate the full channel
line-up. Activation normally takes 10-15 minutes, but during peak
busy periods, you may need to keep MyFi on for up to an hour to
complete the activation process. When you can access the full
channel lineup on your MyFi, you're done!
Go ahead!
Rotate the dial to preview a list of channels. When you find one
you're interested in, press the dial in to tune to that channel.
Insert battery
Important! You will need to fully charge your Myfi battery for at
least three hours to have sufficient battery power for portable use.